AMBER ALARM - Amber represents an aeration alarm (COMP)

​

1. Find COMP switch on front of control panel and toggle to mute/ middle position.

​

2. Check if compressor is running by placing hand on compressor to feel for vibration.

If Yes, go to #3.

If No, go to #4.

​

3. Check air tubing for leaks or attachment starting from bottom/rear of control panel to bottom/side of compressor. If detached, reattach. If leaking, tape up and call or text us at 936-331-0756. After light turns off, toggle COMP switch back to run/up position.

​

4. Reset circuit breaker in control panel labeled comp. Check if compressor is running by placing hand on compressor to feel for vibration.

If Yes, go to #5.

If No, go to #6.

​

5. After light turns off, toggle COMP switch back to run/up position.

​

6. If the alarm persists or both alarms are on, contact us at 936-331-0756.